Clear 3d printer filament pla 1.75 mm recycled high temp High
PLA Silk 3D printer filaments information:
Silk PLA (Polymer Composites): Silk Pla is a typical composite material, the main components are
PLA and many functional addition materials, such as polyester.
There’s about 10-20% of this stuff inside. For the detail
percentage, it is different among brands. These proportions of the
material give the filaments glossy finish, The surface looks like
Silk pla is based on pla plastic, which has the same
characteristics as PLA. It can be melted and processed at high
temperatures and returned to a solid state at low temperatures.
Silk pla can be easily processed, such as grinding, polishing,
cutting, injection and painting.
|Bed Setting||Masking tap or temperature resistant heat tape|
|Applicable Models||FDM—3D Printer|
PLA, polylacticacid, is a new biodegradable and environmentally
material.The printing temperature is generally between 180-210℃,
and no pungent smell when printing .It has a good anti-solvent
type, good biocompatibility, gloss, transparency and heat
1. All of our 3D printer filaments are 100% virgin material,never
use recycled material or regrind material,and all had achieved the
2.Before the mass production,our engineer always do the test to
make sure that each batch of new raw materials must be printed by
3.The Laser diameter runs automatically to control the diameter of
the filaments and keeps it in a right range of 1.75/3.0mm,and our
engineer will adjust it immediately when it alarms to indicate of
wrong size,and this unqualified filament will be cut off and never
4.To keep the filaments dry,each roll of filament is packed in a
vacuumed polybag with a desiccant inside of it.